Struct openssl::asn1::Asn1TimeRef

pub struct Asn1TimeRef(_);

Reference to an Asn1Time

Implementations

impl Asn1TimeRef

pub fn diff(&self, compare: &Self) -> Result<TimeDiff, ErrorStack>

Find difference between two times

This corresponds to ASN1_TIME_diff.

pub fn compare(&self, other: &Self) -> Result<Ordering, ErrorStack>

Compare two times

This corresponds to ASN1_TIME_compare.

Trait Implementations

impl AsRef<Asn1TimeRef> for Asn1Time

fn as_ref(&self) -> &Asn1TimeRef

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<Asn1TimeRef> for Asn1Time

fn borrow(&self) -> &Asn1TimeRef

Immutably borrows from an owned value.

impl Debug for Asn1TimeRef

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Asn1TimeRef

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl ForeignTypeRef for Asn1TimeRef

type CType = ASN1_TIME

The raw C type.

unsafe fn from_ptr<'a>(ptr: *mut Self::CType) -> &'a Self

Constructs a shared instance of this type from its raw type.

unsafe fn from_ptr_mut<'a>(ptr: *mut Self::CType) -> &'a mut Self

Constructs a mutable reference of this type from its raw type.

fn as_ptr(&self) -> *mut Self::CType

Returns a raw pointer to the wrapped value.

impl<'a> PartialEq<&'a Asn1TimeRef> for Asn1Time

fn eq(&self, other: &&'a Asn1TimeRef) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<Asn1Time> for &'a Asn1TimeRef

fn eq(&self, other: &Asn1Time) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Asn1Time> for Asn1TimeRef

fn eq(&self, other: &Asn1Time) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Asn1TimeRef> for Asn1Time

fn eq(&self, other: &Asn1TimeRef) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Asn1TimeRef> for Asn1TimeRef

fn eq(&self, other: &Asn1TimeRef) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialOrd<&'a Asn1TimeRef> for Asn1Time

fn partial_cmp(&self, other: &&'a Asn1TimeRef) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<Asn1Time> for &'a Asn1TimeRef

fn partial_cmp(&self, other: &Asn1Time) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Asn1Time> for Asn1TimeRef

fn partial_cmp(&self, other: &Asn1Time) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Asn1TimeRef> for Asn1Time

fn partial_cmp(&self, other: &Asn1TimeRef) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Asn1TimeRef> for Asn1TimeRef

fn partial_cmp(&self, other: &Asn1TimeRef) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Send for Asn1TimeRef

impl Sync for Asn1TimeRef