Struct openssl::asn1::Asn1Time

pub struct Asn1Time(_);

Time storage and comparison

Asn1Time should be used to store and share time information using certificates. If Asn1Time is set using a string, it must be in either YYMMDDHHMMSSZ, YYYYMMDDHHMMSSZ, or another ASN.1 format.

ASN_TIME_set documentation at OpenSSL explains the ASN.1 implementation used by OpenSSL.

Implementations

impl Asn1Time

pub fn days_from_now(days: u32) -> Result<Asn1Time, ErrorStack>

Creates a new time on specified interval in days from now

pub fn from_unix(time: time_t) -> Result<Asn1Time, ErrorStack>

Creates a new time from the specified time_t value

This corresponds to ASN1_TIME_set.

pub fn from_str(s: &str) -> Result<Asn1Time, ErrorStack>

Creates a new time corresponding to the specified ASN1 time string.

This corresponds to ASN1_TIME_set_string.

pub fn from_str_x509(s: &str) -> Result<Asn1Time, ErrorStack>

Creates a new time corresponding to the specified X509 time string.

Requires OpenSSL 1.1.1 or newer.

This corresponds to ASN1_TIME_set_string_X509.

Methods from Deref<Target = Asn1TimeRef>

pub fn diff(&self, compare: &Self) -> Result<TimeDiff, ErrorStack>

Find difference between two times

This corresponds to ASN1_TIME_diff.

pub fn compare(&self, other: &Self) -> Result<Ordering, ErrorStack>

Compare two times

This corresponds to ASN1_TIME_compare.

Trait Implementations

impl AsRef<Asn1TimeRef> for Asn1Time

fn as_ref(&self) -> &Asn1TimeRef

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<Asn1TimeRef> for Asn1Time

fn borrow(&self) -> &Asn1TimeRef

Immutably borrows from an owned value.

impl Deref for Asn1Time

type Target = Asn1TimeRef

The resulting type after dereferencing.

fn deref(&self) -> &Asn1TimeRef

Dereferences the value.

impl DerefMut for Asn1Time

fn deref_mut(&mut self) -> &mut Asn1TimeRef

Mutably dereferences the value.

impl Drop for Asn1Time

fn drop(&mut self)

Executes the destructor for this type.

impl ForeignType for Asn1Time

type CType = ASN1_TIME

The raw C type.

type Ref = Asn1TimeRef

The type representing a reference to this type.

unsafe fn from_ptr(ptr: *mut ASN1_TIME) -> Asn1Time

Constructs an instance of this type from its raw type.

fn as_ptr(&self) -> *mut ASN1_TIME

Returns a raw pointer to the wrapped value.

impl<'a> PartialEq<&'a Asn1TimeRef> for Asn1Time

fn eq(&self, other: &&'a Asn1TimeRef) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialEq<Asn1Time> for &'a Asn1TimeRef

fn eq(&self, other: &Asn1Time) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Asn1Time> for Asn1Time

fn eq(&self, other: &Asn1Time) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Asn1Time> for Asn1TimeRef

fn eq(&self, other: &Asn1Time) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Asn1TimeRef> for Asn1Time

fn eq(&self, other: &Asn1TimeRef) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<'a> PartialOrd<&'a Asn1TimeRef> for Asn1Time

fn partial_cmp(&self, other: &&'a Asn1TimeRef) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> PartialOrd<Asn1Time> for &'a Asn1TimeRef

fn partial_cmp(&self, other: &Asn1Time) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Asn1Time> for Asn1Time

fn partial_cmp(&self, other: &Asn1Time) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Asn1Time> for Asn1TimeRef

fn partial_cmp(&self, other: &Asn1Time) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Asn1TimeRef> for Asn1Time

fn partial_cmp(&self, other: &Asn1TimeRef) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Send for Asn1Time

impl Sync for Asn1Time