Struct cairo::SvgSurface

source ·
#[repr(transparent)]
pub struct SvgSurface(_);

Implementations§

source§

impl SvgSurface

source§

impl SvgSurface

source

pub fn new<P: AsRef<Path>>( width: f64, height: f64, path: Option<P> ) -> Result<SvgSurface, Error>

source

pub fn for_stream<W: Write + 'static>( width: f64, height: f64, stream: W ) -> Result<Self, Error>

Takes full ownership of the output stream, which is not allowed to borrow any lifetime shorter than 'static.

Because the underlying cairo_surface_t is reference-counted, a lifetime parameter in a Rust wrapper type would not be enough to track how long it can keep writing to the stream.

source

pub unsafe fn for_raw_stream<W: Write + 'static>( width: f64, height: f64, stream: *mut W ) -> Result<Self, Error>

Allows writing to a borrowed stream. The lifetime of the borrow is not tracked.

Safety

The value that stream points to must live at least until the underlying cairo_surface_t (which maybe be longer then the Rust PdfSurface wrapper, because of reference-counting), or until the output stream is removed from the surface with Surface::finish_output_stream.

Since the former is hard to track for sure, the latter is strongly recommended. The concrete type behind the Box<dyn Any> value returned by finish_output_stream is private, so you won’t be able to downcast it. But removing it anyway ensures that later writes do not go through a dangling pointer.

source

pub fn versions() -> impl Iterator<Item = SvgVersion>

source

pub fn restrict(&self, version: SvgVersion)

source

pub fn set_document_unit(&mut self, unit: SvgUnit)

source

pub fn document_unit(&self) -> SvgUnit

Methods from Deref<Target = Surface>§

source

pub fn to_raw_none(&self) -> *mut cairo_surface_t

source

pub fn create_similar( &self, content: Content, width: i32, height: i32 ) -> Result<Surface, Error>

source

pub fn create_for_rectangle(&self, bounds: Rectangle) -> Result<Surface, Error>

source

pub fn mime_data(&self, mime_type: &str) -> Option<Vec<u8>>

source

pub unsafe fn mime_data_raw(&self, mime_type: &str) -> Option<&[u8]>

source

pub fn set_mime_data<T: AsRef<[u8]> + 'static>( &self, mime_type: &str, slice: T ) -> Result<(), Error>

source

pub fn supports_mime_type(&self, mime_type: &str) -> bool

source

pub fn device(&self) -> Option<Device>

source

pub fn content(&self) -> Content

source

pub fn set_device_offset(&self, x_offset: f64, y_offset: f64)

source

pub fn device_offset(&self) -> (f64, f64)

source

pub fn set_device_scale(&self, x_scale: f64, y_scale: f64)

source

pub fn device_scale(&self) -> (f64, f64)

source

pub fn set_fallback_resolution( &self, x_pixels_per_inch: f64, y_pixels_per_inch: f64 )

source

pub fn fallback_resolution(&self) -> (f64, f64)

source

pub fn create_similar_image( &self, format: Format, width: i32, height: i32 ) -> Result<Surface, Error>

source

pub fn map_to_image( &self, extents: Option<RectangleInt> ) -> Result<MappedImageSurface, Error>

source

pub fn mark_dirty(&self)

source

pub fn mark_dirty_rectangle(&self, x: i32, y: i32, width: i32, height: i32)

source

pub fn status(&self) -> Result<(), Error>

source

pub fn set_user_data<T: 'static>( &self, key: &'static UserDataKey<T>, value: Rc<T> ) -> Result<(), Error>

Attach user data to self for the given key.

source

pub fn user_data<T: 'static>( &self, key: &'static UserDataKey<T> ) -> Option<Rc<T>>

Return the user data previously attached to self with the given key, if any.

source

pub fn user_data_ptr<T: 'static>( &self, key: &'static UserDataKey<T> ) -> Option<NonNull<T>>

Return the user data previously attached to self with the given key, if any, without incrementing the reference count.

The pointer is valid when it is returned from this method, until the cairo object that self represents is destroyed or remove_user_data or set_user_data is called with the same key.

source

pub fn remove_user_data<T: 'static>( &self, key: &'static UserDataKey<T> ) -> Result<(), Error>

Unattached from self the user data associated with key, if any. If there is no other Rc strong reference, the data is destroyed.

source

pub fn flush(&self)

source

pub fn finish(&self)

source

pub fn type_(&self) -> SurfaceType

source

pub fn write_to_png<W: Write>(&self, stream: &mut W) -> Result<(), IoError>

This function writes the surface as a PNG image to the given stream.

If the underlying surface does not support being written as a PNG, this will return Error::SurfaceTypeMismatch

source

pub fn finish_output_stream(&self) -> Result<Box<dyn Any>, StreamWithError>

Finish the surface, then remove and return the output stream if any.

This calls Surface::finish, to make sure pending writes are done.

This is relevant for surfaces created for example with crate::PdfSurface::for_stream.

Use Box::downcast to recover the concrete stream type.

Panics

This method panics if:

  • This method was already called for this surface, or
  • This surface was not created with an output stream in the first place, or
  • A previous write to this surface panicked, or
  • A previous write happened while another write was ongoing, or
  • A write is ongoing now.

The latter two cases can only occur with a pathological output stream type that accesses the same surface again from Write::write_all.

Trait Implementations§

source§

impl AsRef<Surface> for SvgSurface

source§

fn as_ref(&self) -> &Surface

Converts this type into a shared reference of the (usually inferred) input type.
source§

impl Clone for SvgSurface

source§

fn clone(&self) -> SvgSurface

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for SvgSurface

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Deref for SvgSurface

§

type Target = Surface

The resulting type after dereferencing.
source§

fn deref(&self) -> &Surface

Dereferences the value.
source§

impl Display for SvgSurface

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl FromGlibPtrBorrow<*mut cairo_surface_t> for SvgSurface

source§

impl FromGlibPtrFull<*mut cairo_surface_t> for SvgSurface

source§

impl FromGlibPtrNone<*mut cairo_surface_t> for SvgSurface

source§

impl<'a> FromValue<'a> for &'a SvgSurface

§

type Checker = GenericValueTypeOrNoneChecker<&'a SvgSurface>

Value type checker.
source§

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value. Read more
source§

impl<'a> FromValue<'a> for SvgSurface

§

type Checker = GenericValueTypeOrNoneChecker<SvgSurface>

Value type checker.
source§

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value. Read more
source§

impl StaticType for SvgSurface

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl<'a> ToGlibPtr<'a, *mut cairo_surface_t> for SvgSurface

§

type Storage = &'a Surface

source§

fn to_glib_none(&'a self) -> Stash<'a, *mut cairo_surface_t, Self>

Transfer: none. Read more
source§

fn to_glib_full(&self) -> *mut cairo_surface_t

Transfer: full. Read more
source§

fn to_glib_container(&'a self) -> Stash<'a, P, Self>

Transfer: container. Read more
source§

impl ToValue for SvgSurface

source§

fn to_value(&self) -> Value

Convert a value to a Value.
source§

fn value_type(&self) -> Type

Returns the type identifer of self. Read more
source§

impl ToValueOptional for SvgSurface

source§

fn to_value_optional(s: Option<&Self>) -> Value

Convert an Option to a Value.
source§

impl TryFrom<Surface> for SvgSurface

§

type Error = Surface

The type returned in the event of a conversion error.
source§

fn try_from(surface: Surface) -> Result<SvgSurface, Surface>

Performs the conversion.
source§

impl ValueType for SvgSurface

§

type Type = SvgSurface

Type to get the Type from. Read more
source§

impl ValueTypeOptional for SvgSurface

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> StaticTypeExt for Twhere T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToClosureReturnValue for Twhere T: ToValue,

source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for Twhere T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<'a, T, C, E> FromValueOptional<'a> for Twhere T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,